Categories
Ansible homelab Kubernetes Linux proxmox Terraform

Deploying a Kubernetes Cluster within Proxmox using Ansible

Introduction / Background

This post has been a long time coming. I apologize for how long it’s taken. I noticed that many other blogs left off at a similar position as I did. Get the VMs created then…. nothing. Creating a Kubernetes cluster locally is a much cheaper (read: basically free) option to learn how Kubes works compared to a cloud-hosted solution or a full-blown Kubernetes engine/solution, such as AWS Elastic Kubernetes Service (EKS), Azure Kubernetes Service (AKS), or Google Kubernetes Engine (GKE).

Anyways, I finally had some time to complete the tutorial series so here we are. Since the last post, my wife and I are now expecting our 2nd kid, I put up a new solar panel array, built our 1st kid a new bed, messed around with MacOS Monterey on Proxmox, built garden boxes, and a bunch of other stuff. Life happens. So without much more delay let’s jump back in.

Here’s a screenshot of the end state Kubernetes Dashboard showing our nodes:

ur Proxmox VM nodes deployed via Terraform
Kubernetes Dashboard showing our Proxmox VM nodes deployed via Terraform

Current State

If you’ve followed the blog series so far, you should have four VMs in your Proxmox cluster ready to go with SSH keys set, the hard drive expanded, and the right amount of vCPUs and memory allocated. If you don’t have those ready to go, take a step back (Deploying Kubernetes VMs in Proxmox with Terraform) and get caught up. We’re not going to use the storage VM. Some guides I followed had one but I haven’t found a need for it yet so we’ll skip it.

VMs in Proxmox ready for Kubernetes installation

Ansible

What is Ansible

If you ask DuckDuckGo to define ansible, it will tell you the following: “A hypothetical device that enables users to communicate instantaneously across great distances; that is, a faster-than-light communication device.”

In our case, it is “a open-source software provisioning, configuration management, and application-deployment tool enabling infrastructure as code.”

We will thus be using Ansible to run the initial Kubernetes set up steps on every machine, initialize the cluster on the master, and join the cluster on the workers/agents.

Initial Ansible Housekeeping

First we need to specify some variables similar to how we did it with Terraform. Create a file in your working directory called ansible-vars.yml and put the following into it:

# specifying a CIDR for our cluster to use.
# can be basically any private range except for ranges already in use.
# apparently it isn't too hard to run out of IPs in a /24, so we're using a /22
pod_cidr: "10.16.0.0/22"

# this defines what the join command filename will be
join_command_location: "join_command.out"

# setting the home directory for retreiving, saving, and executing files
home_dir: "/home/ubuntu"

Equally as important (and potentially a better starting point than the variables) is defining the hosts. In ansible-hosts.txt:

# this is a basic file putting different hosts into categories
# used by ansible to determine which actions to run on which hosts

[all]
10.98.1.41
10.98.1.51
10.98.1.52

[kube_server]
10.98.1.41

[kube_agents]
10.98.1.51
10.98.1.52

[kube_storage]
#10.98.1.61

Checking Ansible can communicated with our hosts

Let’s pause here and make sure Ansible can communicate with our VMs. We will use a simple built-in module named ‘ping’ to do so. The below command broken down:

  • -i ansible-hosts.txt – use the ansible-hosts.txt file
  • all – run the command against the [all] block from the ansible-hosts.txt file
  • -u ubuntu – log in with user ubuntu (since that’s what we set up with the Ubuntu 20.04 Cloud Init template). if you don’t use -u [user], it will use your currently logged in user to attempt to SSH.
  • -m ping – run the ping module
ansible -i ansible-hosts.txt all -u ubuntu -m ping

If all goes well, you will receive “ping”: “pong” for each of the VMs you have listed in the [all] block of the ansible-hosts.txt file.

Using Ansible’s ping to check communications with each of the VMs for deployment

Potential SSH errors

If you’ve previously SSH’d to these IPs and have subsequently destroyed/re-created them, you will get scary sounding SSH errors about remote host identification has changed. Run the suggested ssh-keygen -f command for each of the IPs to fix it.

You might also have to SSH into each of the hosts to accept the host key. I’ve done this whole procedure a couple times so I don’t recall what will pop up first attempt.

SSH remote host identification has changed error. Run suggested ssh-keygen -f command to resolve.
ssh-keygen -f "/home/<username_here>/.ssh/known_hosts" -R "10.98.1.41"
ssh-keygen -f "/home/<username_here>/.ssh/known_hosts" -R "10.98.1.51"
ssh-keygen -f "/home/<username_here>/.ssh/known_hosts" -R "10.98.1.52"
ssh-keygen -f "/home/<username_here>/.ssh/known_hosts" -R "10.98.1.61"

Installing Kubernetes dependencies with Ansible

Then we need a script to install the dependencies and the Kubernetes utilities themselves. This script does quite a few things. Gets apt ready to install things, adding the Docker & Kubernetes signing key, installing Docker and Kubernetes, disabling swap, and adding the ubuntu user to the Docker group.

ansible-install-kubernetes-dependencies.yml:

# https://kubernetes.io/blog/2019/03/15/kubernetes-setup-using-ansible-and-vagrant/
# https://github.com/virtualelephant/vsphere-kubernetes/blob/master/ansible/cilium-install.yml#L57

# ansible .yml files define what tasks/operations to run

---
- hosts: all # run on the "all" hosts category from ansible-hosts.txt
  # become means be superuser
  become: true
  remote_user: ubuntu
  tasks:
  - name: Install packages that allow apt to be used over HTTPS
    apt:
      name: "{{ packages }}"
      state: present
      update_cache: yes
    vars:
      packages:
      - apt-transport-https
      - ca-certificates
      - curl
      - gnupg-agent
      - software-properties-common

  - name: Add an apt signing key for Docker
    apt_key:
      url: https://download.docker.com/linux/ubuntu/gpg
      state: present

  - name: Add apt repository for stable version
    apt_repository:
      repo: deb [arch=amd64] https://download.docker.com/linux/ubuntu xenial stable
      state: present

  - name: Install docker and its dependecies
    apt: 
      name: "{{ packages }}"
      state: present
      update_cache: yes
    vars:
      packages:
      - docker-ce 
      - docker-ce-cli 
      - containerd.io
      
  - name: verify docker installed, enabled, and started
    service:
      name: docker
      state: started
      enabled: yes
      
  - name: Remove swapfile from /etc/fstab
    mount:
      name: "{{ item }}"
      fstype: swap
      state: absent
    with_items:
      - swap
      - none

  - name: Disable swap
    command: swapoff -a
    when: ansible_swaptotal_mb >= 0
    
  - name: Add an apt signing key for Kubernetes
    apt_key:
      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
      state: present

  - name: Adding apt repository for Kubernetes
    apt_repository:
      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
      state: present
      filename: kubernetes.list

  - name: Install Kubernetes binaries
    apt: 
      name: "{{ packages }}"
      state: present
      update_cache: yes
    vars:
      packages:
        # it is usually recommended to specify which version you want to install
        - kubelet=1.23.6-00
        - kubeadm=1.23.6-00
        - kubectl=1.23.6-00
        
  - name: hold kubernetes binary versions (prevent from being updated)
    dpkg_selections:
      name: "{{ item }}"
      selection: hold
    loop:
      - kubelet
      - kubeadm
      - kubectl
        
# this has to do with nodes having different internal/external/mgmt IPs
# {{ node_ip }} comes from vagrant, which I'm not using yet
#  - name: Configure node ip - 
#    lineinfile:
#      path: /etc/default/kubelet
#      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}

  - name: Restart kubelet
    service:
      name: kubelet
      daemon_reload: yes
      state: restarted
      
  - name: add ubuntu user to docker
    user:
      name: ubuntu
      group: docker
  
  - name: reboot to apply swap disable
    reboot:
      reboot_timeout: 180 #allow 3 minutes for reboot to happen

With our fresh VMs straight outta Terraform, let’s now run the Ansible script to install the dependencies.

Ansible command to run the Kubernetes dependency playbook (pretty straight-forward: the -i is to input the hosts file, then the next argument is the playbook file itself):

ansible-playbook -i ansible-hosts.txt ansible-install-kubernetes-dependencies.yml

It’ll take a bit of time to run (1m26s in my case). If all goes well, you will be presented with a summary screen (called PLAY RECAP) showing some items in green with status ok and some items in orange with status changed. I got 13 ok’s, 10 changed’s, and 1 skipped.

Ansible play recap showing successful Kubernetes dependencies installation

Initialize the Kubernetes cluster on the master

With the dependencies installed, we can now proceed to initialize the Kubernetes cluster itself on the server/master machine. This script sets docker to use systemd cgroups driver (don’t recall what the alternative is at the moment but this was the easiest of the alternatives), initializes the cluster, copies the cluster files to the ubuntu user’s home directory, installs Calico networking plugin, and the standard Kubernetes dashboard.

ansible-init-cluster.yml:

- hosts: kube_server
  become: true
  remote_user: ubuntu
  
  vars_files:
    - ansible-vars.yml
    
  tasks:
  - name: set docker to use systemd cgroups driver
    copy:
      dest: "/etc/docker/daemon.json"
      content: |
        {
          "exec-opts": ["native.cgroupdriver=systemd"]
        }
  - name: restart docker
    service:
      name: docker
      state: restarted
    
  - name: Initialize Kubernetes cluster
    command: "kubeadm init --pod-network-cidr {{ pod_cidr }}"
    args:
      creates: /etc/kubernetes/admin.conf # skip this task if the file already exists
    register: kube_init
    
  - name: show kube init info
    debug:
      var: kube_init
      
  - name: Create .kube directory in user home
    file:
      path: "{{ home_dir }}/.kube"
      state: directory
      owner: 1000
      group: 1000

  - name: Configure .kube/config files in user home
    copy:
      src: /etc/kubernetes/admin.conf
      dest: "{{ home_dir }}/.kube/config"
      remote_src: yes
      owner: 1000
      group: 1000
      
  - name: restart kubelet for config changes
    service:
      name: kubelet
      state: restarted
      
  - name: get calico networking
    get_url:
      url: https://projectcalico.docs.tigera.io/manifests/calico.yaml
      dest: "{{ home_dir }}/calico.yaml"
      
  - name: apply calico networking
    become: no
    command: kubectl apply -f "{{ home_dir }}/calico.yaml"
    
  - name: get dashboard
    get_url:
      url: https://raw.githubusercontent.com/kubernetes/dashboard/v2.5.0/aio/deploy/recommended.yaml
      dest: "{{ home_dir }}/dashboard.yaml"
    
  - name: apply dashboard
    become: no
    command: kubectl apply -f "{{ home_dir }}/dashboard.yaml"

Initializing the cluster took 53s on my machine. One of the first tasks is to download the images which takes the majority of the duration. You should get 13 ok and 10 changed with the init. I had two extra user check tasks because I was fighting some issues with applying the Calico networking.

ansible-playbook -i ansible-hosts.txt ansible-init-cluster.yml
Successful Kubernetes init execution showing join token at the bottom

Getting the join command and joining worker nodes

With the master up and running, we need to retrieve the join command. I chose to save the command locally and read the file in a subsequent Ansible playbook. This could certainly be combined into a single playbook.

ansible-get-join-command.yaml –

- hosts: kube_server
  become: false
  remote_user: ubuntu
  
  vars_files:
    - ansible-vars.yml
    
  tasks:
  - name: Extract the join command
    become: true
    command: "kubeadm token create --print-join-command"
    register: join_command
    
  - name: show join command
    debug:
      var: join_command
      
  - name: Save kubeadm join command for cluster
    local_action: copy content={{ join_command.stdout_lines | last | trim }} dest={{ join_command_location }} # defaults to your local cwd/join_command.out

And for the command:

ansible-playbook -i ansible-hosts.txt ansible-get-join-command.yml
Successfully retrieved the join command and saved it to the local machine

Now to join the workers/agents, our Ansible playbook will read that join_command.out file and use it to join the cluster.

ansible-join-workers.yml –

- hosts: kube_agents
  become: true
  remote_user: ubuntu
  
  vars_files:
    - ansible-vars.yml
    
  tasks:
  - name: set docker to use systemd cgroups driver
    copy:
      dest: "/etc/docker/daemon.json"
      content: |
        {
          "exec-opts": ["native.cgroupdriver=systemd"]
        }
  - name: restart docker
    service:
      name: docker
      state: restarted
    
  - name: read join command
    debug: msg={{ lookup('file', join_command_location) }}
    register: join_command_local
    
  - name: show join command
    debug:
      var: join_command_local.msg
      
  - name: join agents to cluster
    command: "{{ join_command_local.msg }}"

And to actually join:

ansible-playbook -i ansible-hosts.txt ansible-join-workers.yml
Two worker agents successfully joined to the cluster

With the two worker nodes/agents joined up to the cluster, you now have a full on Kubernetes cluster up and running! Wait a few minutes, then log into the server and run kubectl get nodes to verify they are present and active (status = Ready):

kubectl get nodes
‘kubectl get nodes’ showing our nodes as ready

Kubernetes Dashboard

Everyone likes a dashboard. Kubernetes has a good one for poking/prodding around. It appears to basically be a visual representation of most (all?) of the “get information” types of command you can run with kubectl (kubectl get nodes, get pods, describe stuff, etc.).

The dashboard was installed with the cluster init script but we still need to create a service account and cluster role binding for the dashboard. These steps are from https://github.com/kubernetes/dashboard/blob/master/docs/user/access-control/creating-sample-user.md. NOTE: the docs state it is not recommended to give admin privileges to this service account. I’m still figuring out Kubernetes privileges so I’m going to proceed anyways.

Dashboard user/role creation

On the master machine, create a file called sa.yaml with the following contents:

apiVersion: v1
kind: ServiceAccount
metadata:
  name: admin-user
  namespace: kubernetes-dashboard

And another file called clusterrole.yaml:

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: admin-user
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
- kind: ServiceAccount
  name: admin-user
  namespace: kubernetes-dashboard

Apply both, then get the token to be used for logging in. The last command will spit out a long string. Copy it starting at ‘ey’ and ending before the username (ubuntu). In the screenshot I have highlighted which part is the token

kubectl apply -f sa.yaml
kubectl apply -f clusterrole.yaml
kubectl -n kubernetes-dashboard get secret $(kubectl -n kubernetes-dashboard get sa/admin-user -o jsonpath="{.secrets[0].name}") -o go-template="{{.data.token | base64decode}}"
Applying both templates and getting the user’s token

SSH Tunnel & kubectl proxy

At this point, the dashboard has been running for a while. We just can’t get to it yet. There are two distinct steps that need to happen. The first is to create a SSH tunnel between your local machine and a machine in the cluster (we will be using the master). Then, from within that SSH session, we will run kubectl proxy to expose the web services.

SSH command – the master’s IP is 10.98.1.41 in this example:

ssh -L 8001:127.0.0.1:8001 [email protected]

The above command will open what appears to be a standard SSH session but the tunnel is running as well. Now execute kubectl proxy:

Kubernetes SSH tunnel & kubectl proxy output

The Kubernetes Dashboard

At this point, you should be able to navigate to the dashboard page from a web browser on your local machine (http://localhost:8001/api/v1/namespaces/kubernetes-dashboard/services/https:kubernetes-dashboard:/proxy/) and you’ll be prompted for a log in. Make sure the token radio button is selected and paste in that long token from earlier. It expires relatively quickly (couple hours I think) so be ready to run the token retrieval command again.

Kubernetes dashboard login with token

The default view is for the “default” namespace which has nothing in it at this point. Change it to All namespaces for more details:

Kubernetes dashboard all namespaces

From here you can see information about everything in the cluster:

Kubernetes dashboard showing relatively default workloads

Conclusion

With this last post, we have concluded the journey from creating a Ubuntu cloud-init image in Proxmox, using Terraform to deploy Kubernetes VMs in Proxmox, all the way through deploying an actual Kubernetes cluster in Proxmox using Ansible. Hope you found this useful!

Video link coming soon.

Discussion

For discussion, either leave a comment here or if you’re a Reddit user, head on over to https://www.reddit.com/r/austinsnerdythings/comments/ubsk1i/i_made_a_tutorial_showing_how_to_deploy_a/.

References

https://kubernetes.io/blog/2019/03/15/kubernetes-setup-using-ansible-and-vagrant/

https://github.com/virtualelephant/vsphere-kubernetes